The AM-01 UPB Plug-in Appliance Module provides appliance control throughout the home for devices such as fans, hair curlers, coffee pots, etc. The AM-01 uses GEN II Universal Powerline Bus technology for superior performance and reliability.

The AM-02 UPB Plug-in Appliance Module provides appliance control throughout the home for devices such as fans, hair curlers, coffee pots, etc.

The CM-01 Combination Input Output module provides two contact closure outputs, and the ability to detect three contact closures or voltage signals.

The FXD-01 Basic Dimming Fixture Module is intended to be installed in a circuit where there is no wall switch to control the circuit but dimming is desired.

The UPB GEN II FXR-01 Basic Fixture Relay Module is intended to be installed in a circuit where there is no wall switch to control the circuit.

The KPCD-6 UPB GEN II desktop 6 button controller can be placed on a tabletop, plugged into a wall outlet, and is used to control multiple UPB devices throughout the home, either individually, or in scenes.

The KPCD-8 UPB GEN II desktop 8 button controller can be placed on a tabletop, plugged into a wall outlet, and is used to control multiple UPB devices throughout the home, either individually, or in scenes.

The KPCW-6 wall mounted 6 button controller fits in one space of a wall mount box and is used to control multiple UPB devices throughout the home, either individually, or in scenes.

The KPCW-8 wall mounted GEN II UPB 8 button controller fits in one space of a wall mount box and is used to control multiple UPB devices throughout the home, either individually, or in scenes.

The LM-01 UPB GEN II Plug-in Lamp Module provides lighting control throughout the home and enables dimming as well as remote control to those lamps.

The LM-02 UPB Plug-in Lamp Module provides lighting control throughout the home and enables dimming as well as remote control to those lamps.

The WMT OUT-01 UPB GEN II Controlled Receptacle is intended to replace a conventional dual wall mounted receptacle for the control of lightng and appliances.

The PED-01 Tabletop Pedestal is combined with an SW-7 Gen2 Universal Transceiver and any of the Web Mountain multi-button or multi-rocker faceplates to create a wide variety of tabletop controllers.

Rarely required, but when it is desired to improve signal strength of the UPB signal in a home, the PPC-1 phase coupler bridges signals across phases of the home, thereby improving signal strength on the second phase.

Run UPStart remotely, use cheap touch panels, set up scheduled events, enable count down timers, send email alerts and more.

The RWS Remote Wall Switch is used with a standard PCS or HAI wall switch in a 3 way or 4 way circuit configuration. Only the wall switch switches the load circuit - the RWS tells the wall switch when the user has changed states on its end and the wall s

The SPIM-01 UPB GEN II module is plugged into a wall outlet and connects to a PC through the use of a cable connected to a serial port. The SPIM converts serial signals to UPB powerline signals.

The SW-2 Gen1 wall dimmer can handle loads up to 900W. It replaces a standard wall switch and provides dimming capabilities, remote control capabilities, and the ability to add transmitters for additional control capabilities.

The SW-3 Remote Wall Switch is used with a standard SW-2 or SW-7 in a 3 way or 4 way circuit configuration. Only the wall switch switches the load circuit - the SW-3 tells the wall switch what to do.

The SW-7 Gen2 wall dimmer can handle loads up to 900W. It replaces a standard wall switch and provides dimming capabilities, remote control capabilities, and the ability to add transmitters for additional control capabilities.

The TIM-01 UPB Timer is one of the most advanced standalone timer-controllers on the market today. It can easily be programmed to control individual UPB devices or UPB scenes either manually or on a timed basis.

The TTC-03-G2 UPB Gen2 Multi-button Table Top Controller provides for simple manual control of lighting and appliances throughout a home.

The UPIM-01 UPB Computer Interface Module provides a mechanism to convert UPB signals from a computer or intelligent server to the AC network for transmission throughout the home.

The WC-28 Gen2 UPB Wall Mount Contoller fits in one slot of a wall mount box and is used to control multiple UPB devices throughout the home, either individually, or in scenes.

The WS1D-10 1000W Gen II UPB wall mounted switch will replace a standard wall switch and provide dimming capabilities as well as remote control capabilities of the controlled light. This switch is used for higher wattage lighting circuits.

The WS1D-15 1500W Gen II UPB wall mounted switch will replace a standard wall switch and provide dimming capabilities as well as remote control capabilities of the controlled light.

The WS1D-24 2400W Gen II UPB wall mounted switch will replace a standard wall switch and provide dimming capabilities as well as remote control capabilities of the controlled light. This device does require a dual electrical wall box for mechanical mount

The WS1D-6 600W Gen II UPB wall mounted switch will replace a standard wall switch and provide dimming capabilities as well as remote control capabilities of the controlled light.